edison light bulbs home depot This is a topic that many people are looking for. amritsang.org is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, amritsang.org would like to introduce to you How to hang patio string lights. Following along are instructions in the video below:
Im going to be demonstrating how easy it is to hang string lights in in your backyard. Whats going on welcome to todays video. My name is today im going to be demonstrating how easy it is to hang string lights in your backyard.
Im going to be demonstrating how to hang these in a zigzag form over a back patio. Now this patio that we have is actually covered so it actually makes it very easy to hang these lights in a zigzag form the time they took me to measure and install the actual lights after everything. Said it done was probably about an hour to an hour and a half so lets get started for this project i use mid ladder.
My drill. Some drill bits some x crews my measuring tape and lights identified the space. Where you want to hang your string lights in this case.
This ledge over my back patio also make sure you have the proper measured length for the area that you want to cover with your string light in this case. I want to do width. By length in a zigzag form.
I also know i wanted to do 4. Hooks on the right side here and also four hooks on the left side all. While not intruding on the neighbor space and giving them light that they dont want on their back patio.

Oh and short visualize. What you want so to create a better visualization for you i know i wanted one point over. Here.
And then it bounced over to one point on one side of my pillar and then bounced back to the wall. Creating a zigzag that would be my second point back to the pillar third point. Etc.
Etc. Go back and forth. Until.
There are four points. On. Each wall.
Also keep in mind. Where your power source is coming from in this case. Right below my very first point so im first going to focus on this ledge wall.

I know my first point wanted to be in the center of the edge and the pillar after that i wanted to make sure i had even spacing between my two pillars. So what i did was find the middle point of the pillar then i took that small section and i cut it in half again so technically in force to find where im going to have my point two as well as my point three touch points of the string lights and point. Four is on the other side of this pillar next.
I wanted to see the height that i had from the ground to my point. That our first measuring the reason. Why i did this is this back patio area actually has a slanted awning.
I guess you could say and i wanted to make sure that the string lights also had that slant so i measure that distance and added a few inches now for the opposite wall. What i did was i found the middle of this whole door section. Which actually this middle mimics the exact same middle spot between the two pillars that emitted.
It previously so youll see here that theres an x that marks. This is the middle of this area and also the middle that mimics between the two pillars and youll also see two of the marks with point two and point three this mimics the exact same points on the other wall. So i wanted to zigzag and shift.
So the middle is point two. Then i can take the same distance on the adjacent wall. And then find my point one two three four so on now.

When you have a stucco wall. Theres going to be a little bit of layers to stucco knowing that if theres wood behind it youre just gonna go through the stucco and then i switched out my bits and then i took that bit drilling into the wood once i drilled about an inch and a half and i took my hook screw and screwed that into the stucco wall and i got this pretty tight. So i hand tightened it until i couldnt go any further crack the box open that has your string lights and make sure you read the instructions.
There are multiple ways to hang string lights. The first one is actually highly recommended use a guide wire with s. Hooks.
And that will make it a little bit more stable in this case. Im using the structure route and im just hooking it to the hooks that i screwed into the wall. A good time to use a guide wire for your string lights.
Is. When your string lights are going to be exposed to the elements. Its going to be swinging back and forth windy rain whatever maybe in my case.
I have that covered patio and its in that awning section. So thats why im taking that structured route instead of having a guide wire take your bulbs out of the box. As well as opening the box to make sure that your string lights are there and they all work.

I actually cracked it open screwed in some light bulbs. Just like christmas lights and made sure everything was working fine and dandy after i did this i carefully started hanging the string like so now i started with the very end because thats where i knew i didnt want to go beyond for the neighbors sake close that up and make sure you that you dont damage. The light bulbs.
All hanging it up now working backwards to the power source. I just go down the string lights and hook every single section to the hooks. That i had installed previously having a little bit of a swoop as you can see here.
Once everythings hung up plug it in and check it out music. Thank you so much for checking out. Todays video.
If you like what you just watched give it a thumbs up and share with your friends and also subscribe. I got a bunch of how to review and unboxing videos thatll show you the simple and easy steps that it takes and turning your house into a home. If you have any questions comments.
Concerns or using suggestions on how you hung your string lights. Do so down below. And well see you next time .

Thank you for watching all the articles on the topic How to hang patio string lights. All shares of amritsang.org are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.