slipcovers for sofas with loose cushions This is a topic that many people are looking for. amritsang.org is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, amritsang.org would like to introduce to you Using Inexpensive Ikea Slipcovers For My Pottery Barn Sofa. Following along are instructions in the video below:
Guys welcome or welcome back to my channel. So for this weeks video. I im gonna be sharing with you a pottery barn slipcover hack.
It will save lots and lots of money so if you have not seen. It already i put out a video where i bought some old tired pottery barn sofas from let go and they were just in bad condition and i just redid the cushions on them before i purchased these sofas. Which did not have slipcovers.
I researched online and i found people saying that the ikea act or couches were very similar to this and you could use the slipcovers on them. And thats as far as it went nobody on the internet that i could find actually showed what they looked like on the sofas. Ive just heard people talking about it and saying that they were gonna get it and i was like oh.
Thats amazing like you can get those slipcovers for really cheap way easier to stomach than several hundred dollars for each of them. But as i bought these sofas and the sub covers. I realized that they did not fit really well like at all i mean they fit on it.
But there was just banging everywhere so without further ado let me show you how i tailored my ikea exhort slipcovers to my pottery barn couch and lets see both of them. So this is what the sub covers look like on the sofa. Without any tailoring.
You can see that theres just bagginess and excess fabric. I mean if they slip on there. But thats about it music so the first order of business was to take it off and put it back on inside out.
So you have access to all of the seams. So im gonna start on the arm first i just went ahead and made everything tight as i could and started pinning. It down just to hold the fabric in place music music.
After you have everything seem ripped. Youre gonna want to breathe tighten everything back and tailor it to the curve of the front of the couch.

You do this by lining up that piping with the seam of the couch. Thats already there and then pulling the fabric taut on either side music so for this corner. I did not want to have to deal with hook tailoring the corner so i just pulled it tight.
So the corner fit and then i had this team here to seem right music so for this one you dont have a scene to follow. Because it doesnt fit quite perfectly. So you just want to bring it as hot as possible and pin it down so for this part underneath the armrest.
Im just pinching the fabric together and seeing where it needs to go under the crease. There and then pinning. Where my fingers land music.
Applause music music. Now the technique for sewing is just to so basically on top of your pin. Very slowly and carefully and just remove the pin before you break your sewing machine needle.
Which i may or may not have done. The trick here is just to go slow okay. So i sewed this straight line here to get it to taylor here and you see that its drooping a little bit.
Im gonna attach a little bit of velcro to that because theres a velcro strip on this pouch already. If you dont have a velcro strip on this couch. You can just use some fabric glue and glue a little piece of velcro.
There and thatll just keep it nice and tight right there i put it back on just to show you where im at right now. But if i were doing this without showing you i would just so all of this and all of that where i pinned it before. But i wanted to show you where was that and kind of just show you just this coming together.
Excuse. All the mess um.

My house is a disaster at this point. But i just wanted to show you how its coming together and just try to make it as clear as possible and try to confuse you as little as possible. But now i am going to go ahead and just pin all of this together.
I may trim this just to make it so its not bulky like this i will trim it all the way across and go ahead and pin. The sides and i will pin this you know as i did this point and seam. All of it so i trimmed off the seam allowance just a little bit there to make it less bulky and here im just pinning.
The piping along the seam is the same as i did on the curb music okay. I put it on the right way this time. And this is what it looks like all finished.
I need to iron. It out of it it looks way better way more tailored. Its not you know factory.
But its so much better than it was and so much cheaper. So now i have to tighten all of this together. And what im gonna do here is i am going to seam rip.
Here up to there and along there and just have this panel. Not have a seen going down the middle. So im gonna just tighten.
It on the sides to you know have it match. This one which is very messy and disheveled for the rest of it im just going to pinch. It here and kind of sew.
A straight line you know up and over on the back. I didnt want to try to not have the seam on the backside.

Because thats just a lot of work because this is a lot of curves and you know its already done so i dont want to mess with that yes thats my dogs toy box. But yeah i am going to put it back on inside out and seam rip and tighten everything up music. Okay.
So im in the middle of pinning. This all the way up and over the backside. But i noticed that there is actually velcro on this already and i dont need it to attach the cushions or anything so i remove this from this side.
Im gonna go ahead. And do the same thing on this side. Im not going to film it because pretty self explanatory im just gonna seam rip that off and then im going to use it to attach this to the velcro thats actually on the sofa itself okay guys.
Another update for you my camera died. So i went ahead and did a few things i sewed up this center seam. Here all the way up there actually sewed it twice because the first time it wasnt tight enough so i just went ahead and we did it and for this bottom panel here.
If youre gonna do this only remove what like the center part and one side. You dont have to remove the other i just ended up reselling that back together and yeah now im gonna reap in all of this there and so along there. But i also wanted to show you the back here so this back part of the couch um.
I was gonna just do a center seam. But i really dont want to do that so. What im gonna do is i am going to and get close here.
Im going to take this and do that treatment to it and kind of just create it dont know what kind of pleat that is but its kind of its just a pleat and then im just gonna sew that there so itll have all of this excess fabric back here still. But its gonna have a pleat so itll be tight. Where it needs to be tight up here.
So im gonna go ahead. And do that so it and ill take you along the process with that music you music applause music to sew the velcro on there i just flipped.

It over on the right side. And did a stitch in the ditch. Basically you run the sewing machine needle through the same line that you already made when you sewed.
It previously if you want to know more about stitching in the ditch. Ill put an article in the description ok guys. I think im done i have sewn everything so now comes the part where im just gonna go ahead and trim of the excess material to about a half inch on each seam and just you know clean it up a little bit more and then after that i think were done this couch is done except for the velcro.
I have to fix i have to add the velcro to the sides because if you look here. Its just poaching out a little bit. And it would just look nicer if i had the velcro to attach it im gonna go ahead.
And do that trim this fabric and then i will show you what it looks like when its all finished and staged and a lot cleaner music okay so im gonna stop the montage of the finished product right now and just tell you because i forgot to say earlier that the slipcovers for the cushions and the back of the couch work. Without any tailoring. You kind of have to stuff the back cushions a little bit in there but they fit perfectly.
And i didnt have to tailor anything i just wanted to throw that in there so people werent pious as to why i did not tailor the seat and back cushions now back to the montage music. Thank you guys so much for watching this video. I hope it helps you out i know this video is not for everybody.
But i just wanted to put it out there because a couple of people requested it when i put out the previous video about the sofas. And i wanted something to be on the internet for poor. People.
Like me who are trying to save a little bit of money here. And there because i just have not found anybody to actually show what it looks like all completed so there you go thats the video for this week. I hope you liked it i hope you guys are all doing well yeah.
I think thats it i hope you guys all have amazing weeks. And i will see you guys in the next video as always bye guys music .

Thank you for watching all the articles on the topic Using Inexpensive Ikea Slipcovers For My Pottery Barn Sofa. All shares of amritsang.org are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.